Automobile ball cage bearing installation points

Automobile ball cage bearing is an important part in the automobile, mainly responsible for bearing the load and protecting the transmission system. Install ball cage bearings need to pay attention to the following points:

1. Before construction, park the vehicle on the level ground to ensure the stability and safety of the vehicle. Then, a jack is used to lift the vehicle and a wooden block is placed under the wheel to prevent the vehicle from sliding.

2. Use tools such as a wrench or pliers to remove the dust cover from the ball cage bearing.

3. Use a professional ball cage bearing removal tool to remove the ball cage bearing from the ball cage sleeve. During the disassembly process, care should be taken not to damage the cage sleeve and cage bearings.

4. Install the new ball cage bearing into the ball cage sleeve, and use a professional ball cage bearing installation tool to fix it. During the installation process, care needs to be taken to ensure that the position of the ball cage bearings is correct and that the fit between the ball cage bearings and the ball cage sleeve is tight.

5. Install the dust cover and secure it using tools such as a wrench or pliers.

6. After installation, it is necessary to check whether the installation position of the ball cage bearing is correct, and ensure that the match between the ball cage bearing and the ball cage sleeve is tight.

7. Finally, it is necessary to check the driving condition of the vehicle to ensure that the installation of the ball cage bearing does not affect the normal running of the vehicle.

When installing ball cage bearings, you need to pay attention to the correct use of tools, and ensure that the ball cage bearings and ball cage sleeves will not be damaged during installation. At the same time, the ball cage bearings are regularly checked and maintained to ensure their normal operation and extend their service life.